Thomas International Thomas International
About Us Products Photo Gallery Contact Us


`REEJA’ BRAND 100 mm SUBMERSIBLE PUMPS

Special Features:
• High operating efficiency resulting low power consumption
• Easy installation requiring no foundation and pump house arrangements
• Maintenance free operation due to water lubricated bearings
• Noiseless Operation, Less operational and maintenance cost
• Rewindable motor.

Construction Details:
MOTOR : REEJA submersible motors are wet type, water lubricated, water cooled, rewindable motor, capable of withstanding wide voltage fluctuations. Specially designed thrust bearings are used that can withstand axial thrust loads with minimum wear & tear. The pump shaft and motor shaft are rigidly connected by a coupling sleeve. The stator is wound with special water proof Bi- axially oriented synthetic film insulated winding wires. Motor sealing is made by means of gromments, O’ rings and oil seal to avoid ingress of well water into the motor. Pressure compensating diaphram is provided to guard the pressure and volume variation of the water inside the motor.

PUMP : REEJA submersible pump is a multistage centrifugal pump. There are two types of pump. The radial flow type for high heads & low discharge and mixed flow type for high discharges and low head. The pump bearings are water lubricated. The suction inlet is situated between the pump & the motor

MATERIAL OF CONSTRUCTION - PUMP
PART NAME
IMPELLER
4” Radial Flow
Noryl
4” Mixed Flow
Noryl / Bronze
DIFFUSER Noryl Noryl / Inbuilt Cast Iron
STAGE CASING Stainless Steel / Noryl Stainless Steel / Cast Iron
STAGE SLEEVE   Stainless Steel
BEARING BUSH Rubber / Leaded Bronze Rubber / Leaded Bronze
PUMP SHAFT Stainless Steel Stainless Steel
STRAINER Stainless Steel Stainless Steel
CABLE GUARD Stainless Steel Stainless Steel
SUCTION CASING Cast Iron Cast Iron
DISCHARGE OUTLET CASING Cast Iron Cast Iron
NON RETURN VALVE Stainless Steel Stainless Steel
NON RETURN VALVE SEAT Rubber Rubber
BEARING BRACKET Stainless Steel Stainless Steel





`REEJA’ BRAND DOMESTIC WATER METERS
`REEJA’ AQUAMET An inferential, single jet, super dry, straight reading type, hermetically sealed water with magnetic drive.

SAILENT FEATURES:
• Highly sensitive to low flow rates and very accurate over its entire flow range
• Having low loss of head which allows water to reach upper floors
• Sealed against tampering
• Totaliser can be oriented around 3600 for easy reading
• Totaliser leakproof, totally dry
• Long maintenance free life
• Self lubricating gears & bearings


DIMENSIONS

DESCRIPTION 15 mm 20 mm
Meter threads ¾” BSP 1” bsp
End connection threads ½” BSP ¾” bsp
Length of meter with couplings 250 mm 290 mm
Length of meter without coupling 110 mm 165 mm
Height 72 mm 75 mm
Width 72 mm 72 mm
Weight with couplings 780 gms 900 gms





Home / Privacy policy / Return & Refund / Terms & Conditions

Designed by: Emaje Infomatics